Tel.: +7(495)790-7178
Mob.: +7(926)096-0594
Contacts, technical support




Stock and order

Stock availability

H5se7 - Side scan sonar with built-in echosounder


H5se7 - ultra-compact side scan sonar (SSS) with built-in echosounder (ES) . It is installed on Board any vessel, including Autonomous vehicles. Is used to search for sunken objects, monitoring of underwater infrastructures, inspection, fairways and harbors in areas surveying works with depths up to 50 m. The use of modern technologies in acoustics and microelectronics have allowed the development of compact and efficient model. Small-sized narrow-profile design allows you to place the locator on Board the ship on the rod d=30mm and a minimum depth.
Ultra-high resolution range (1 cm) for object search and target detection. Using a frequency of 700 kHz, SSS provides real-time high-quality image of the bottom with photographic quality in the field of view up to 190 m.
El can work simultaneously with SSS and allows you to perform measurements at depths up to 50m. The use of SSS allows measurements with instrumental evaluation to avoid artifacts tracks distance. When using the optional all-round view option, it is possible to operate in the all-round sonar mode from the ice or while the vessel is stationary.

Application areas:

  • survey of the bottom, identification of relief features, various inhomogeneities
  • search for objects on the bottom and in the water column
  • echo-sounding survey
  • echo-sounding survey with instrumental estimation
  • engineering and ecological monitoring


  • easy to transport and store – all sonar in one case
  • wide range of SSS view, high quality images
  • built-in Li-ion battery
  • built-in course-roll-trim sensors
  • long battery life
  • automatic adjustment to shooting conditions


Similar model: H5se3 - compact SSS with echo sounder (ES), H5se1 - compact SSS with echo sounder for large depths,  H5se12 - SSS with echo sounder

System specification
Basic kit

Monoblock H5se7 Electronic&trancduser unit all-in-one, Ethernet interface; aluminum-coated housing and impact-resistant molded plastic, cover antenna -polyurethane.
Documentation User manual, HyScan manual, quick start guide
Software HyScan Base (for Windows XP/7/8). It provides scanning and viewing of data in real time, recording and subsequent playback, measurement of object parameters, data conversion for further processing.
Included accessories Mounting kit
Cable for connection to computer and accumulator
Case for transportation and storage
Bracket for mounting to the rod
Additional accessories and equipment, software Power supplies Battery (10..17B or 10..30V)
Monoblock AC power adapter
Laptop battery power adapter

Navigation receiver

Built-in sensors Course (accuracy 2°); roll, trim ( accuracy 0.2°)
Cabels Extension cords, adapters
Mounting Installation kit for small vessel
Integration Mobile accessory pack
All-round drive
Computer PC compatible computer (laptop)
Software Navigation, secondary processing, integration with Autonomous vehicles


Specification of H5se7 monoblock

Operating frequency, kHz

700 kHz (tone, SSS) for SSS
1000 kHz (tone, SSS) for ES

Resolution, cm

1 (for slant range to SSS)
1 (depth for ES)

The derectivity pattern, the angle of the antennas SSS 50° (vertical) x 0.7° (horizontal); installation angle 25° to horizontal for SSS

(3..6)° for ES
Range for SSS up to 120 m on Board, total field of view up to 200m
Max. measured depth ES, m up to 50 m
Supply voltage

1.5 (stop)
2.5 (average when scanning in tone)
12 (average when scanning in CHIRP)

Weight 0.7 (monoblock without cable)
1.5 (basic set)
Dimensions (LxWxH), mm

211x78x43 (monoblock without cable and bracket)
340x80x270 (case of the basic set)

Environmental Deepening,m 0,5..10m
Recommended range of examined depths, m

0.5..20m (SSS)

0.5..50m (ES)

Scanning velocity knots up to 10
Roughness, points up to 3  (on-board mounting)
Mounting On the rod d=30mm, 20x40mm or larger section
Temperature, °С -10..+40 (working)
+5..+40 (storage)

H5se7 is supplied in various configurations. Recommendations on the choice of configuration are given in the specification.

The basic set includes:

  1. Monoblock H5se7 with gibrid cable
  2. Software HyScan Base (Windows)
  3. Operating manual (on disk), quick start guide, passport
  4. Mounting kit
  5. Cable for connection to computer and accumulator
  6. Case for transportation and storage

The minimum set of components to work with the base set:

  1. Computer (laptop) with installed base set SOFTWARE
  2. Battery for laptop and monoblock power supply
  3. Installation kit (mounting elements)
  4. Navigation receiver (connects to computer)

NOTICE. The absence of a set of angle sensors can cause significant errors in determining the coordinates when working at great depths.

Expansion kit contains more subsystems and accessories, which help the user to organize meals, monitoring of results, to adapt the complex to vessels of different type and displacement, etc., the user can purchase additional sub-systems and accessories yourself or include them in the package.