Contacts

Tel.: +7(495)790-7178
Mob.: +7(926)096-0594
support@hydrasonars.ru
Contacts, technical support

Gallery

Gallery

Video

Stock and order

Stock availability
Order

H5se1 - Side scan sonar with built-in echosounder

 

H5se1 - Side scan sonar (SSS) with built-in echosounder (ES) for on-board placement. Operating frequencies 100 kHz (HBO) and 400 kHz (El) allow operation at depths up to 400m.
The effective side-view method of search is used when working on large areas, which allows to reduce the time of work and material costs.
Small-sized narrow-profile design of SSS allows you to place it on board of any vessel on a rod with a 25x50mm cross section and a minimum depth. A special method of fastening on the rod allows you to protect SSS from impact and reduce the risk of damage. Sonar survey of the water area is carried out with SSS which placed on Board of a moving carrier (ship, boat, boat, etc.), allowing to obtain high-quality digital detailed acoustic image of the bottom in real time. Built-in echosounder allows you to perform echo-sounding survey with instrumental estimation.

SSS provides high resolution range (3.5 cm) for object search and target detection. The recommended range of the surveyed depths up to 300m (for SSS) and up to 400m (for ES) allows to work on the shelf.
Simple installation, quick mounting provides work on any vessel. SSS connects to a PC compatible computer with Microsoft ®Windows® operating system via an Ethernet port. The program HyScan, included in the package, provides scanning and data viewing in real time, recording and playback, measurement of object parameters. Built-in SSSE batteries allow you to work up to 8 hours or continuously in charging mode.


Application areas:

  • survey of the bottom, identification of relief features, various inhomogeneities
  • search for objects on the bottom and in the water column
  • echo-sounding survey
  • echo-sounding survey with instrumental estimation
  • engineering and ecological monitoring

Advantages:

  • easy to transport and store – all sonar in one case
  • wide range of SSS view, high quality images
  • built-in Li-ion battery
  • built-in course-roll-trim sensors
  • long battery life

Similar model: H5se3 - SSS with built-in echosounder

System specification
Basic set




Monoblock H5se1 Combined electronics and antenna unit with hybrid power cable and Ethernet interface, on-Board placement (rod mount)
Power =22,2V (built-in Li-ion battery)
Software HyScan Base (for Windows XP/7/8)
Inbox accessories Built-in course-roll-trim sensors (optional)
Case for transportation and storage
Mounting kit for mounting to the rod
Cable splitter
Battery charger
Additional accessories and software, software (sold separately) Cabels Extension cords, adapters
Sensors Navigation receiver
Sound speed sensor in water, sound speed profile
Fixing Installation kit for inflatable boat
integration Operator workplace
Set of accessories
Kit MVK
Computer PC compatible computer (laptop)
Software Navigation, secondary processing

 

Specification of H5se1 monoblock
Acoustics Operating frequency, kHz 76-115 (SSS)
380-420 (ES)
Range resolution, cm 7,5 (SSS)
3 (ES)
Range up to 1200 m on Board, total field of view up to 2000 m (for SSS)
up to 120m (for ES)
Recommended range of examined depths, m 5..300 (SSS)
1..400 (ES)
Radiation mode Tone, CHIRP
Antenna Diagram 50°x 2.5° (for SSS)
(3..6)° (for ES)
Dual SSS receiving and transmitting antenna, tilt angle from 30° to 60° in increments of 7.5° to the horizontal (manual setting of the tilt angle, 5 positions, independently for each side).
Integrated sensor Course, roll, trim accuracy 0.2° (roll, trim)
accuracy 1° (course)
Built-in Li-ion battery Rated voltage/rated capacity 22.2 V / 6.8 Ah
Design Case Impact resistant molded plastic black
Coating antennas – polyurethane
Cabel Hybrid cable
Mounting to the rod Two holes d=8.5 mm
Installation location on board the ship on the rod section 25x50mm
Deepening at work up to 6 m
Power Supply voltage =25.2 V (built-in Li-ion batteries)
~110..220V / 47-63 Hz (when charging the built-in batteries from the mains)
Consumption, W 2 (stop)
500 (max. pulse when scanning)
5 (average when scanning in tone)
20 (secondary scans, chirp)
Interface Data Ethernet, RJ-45
Weight In the air 5 kg (monoblock without cable)
In fresh water 3 kg
Basic set 9 kg (in case)
Size Monobloc (without cable) 1000x450x170 mm (LxWxH)
The case of the basic set 300x400x110 mm (LxWxH)
Operation condition Operating temperature -10..+40°С
Storage -40..+50°С
Battery life Up to 8 hours (depending on operating mode)

HyScan software – the program of survey and primary data processing used at work of SSSE is a part of a basic set of delivery. You can download the program via Download software center.
 

Additional information: Documentation

The complex is supplied in various configurations. Recommendations on the choice of configuration are given in the specification.

The basic set includes:

  1. Monoblock H5se1 with gibrid cable
  2. Splitter cable CPL002
  3. Battery charger
  4. Mounting kit
  5. CD with software and documentation
  6. Case for transportation and storage
  7. Recording program HyScan base (on disk)
  8. Operating manual (on disk), quick start guide, passport

NOTICE. Cable lengths are specified when ordering. Possible cable lengths are given in the specification.

The minimum set of components to work with the base set:

  1. Computer (laptop) with installed base set SOFTWARE
  2. Battery or power supply (when running on mains)
  3. Installation kit (mounting elements)

NOTICE. The absence of a set of angle sensors can cause significant errors in determining the coordinates when working at great depths.

Expansion kit contains more subsystems and accessories, which help the user to organize meals, monitoring of results, to adapt the complex to vessels of different type and displacement, etc., the user can purchase additional sub-systems and accessories yourself or include them in the package.


PLACE YOUR ORDER