Selection of the complex configuration
To select the configuration of the complex it is necessary:
- determine the type of sonar used
- select the options of sonar used
- define a set of optional equipment
- define a set of additional SW
If you are unable to select the type of sonar you are using, please fill out the form below (section "Request complex configuration") and send it to us. In accordance with your tasks, we will help you to choose the necessary equipment and SW.
For more information about the possibilities of use and application of different types of sonar, please contact the technical support Department.
Selection of the type of sonar used
Depending on the type of sonar (composition of sonar systems-HAS), one or more functions are provided:
Function |
SSS, DSSS |
SSSE |
ISSS |
PPF |
Swath bottom and water column monitoring |
• |
• |
• |
|
Search for objects at the bottom and in the water column |
• |
• |
• |
|
Engineering monitoring |
• |
• |
• |
• |
Ecological monitoring |
• |
• |
• |
|
Depth measurement |
• |
• |
• |
• |
Echo-Sounder measurements |
|
• |
• |
|
Echo-Sounder measurements with instrumental evaluation |
|
• |
• |
|
Swath bathymetry |
|
|
• |
|
Search for objects in the the depth of bottom and bottom sediments |
|
|
|
• |
The classification of the type of soil and bottom sediments |
|
|
|
• |
The definition of a power of bottom sediments |
|
|
|
• |
The choice of model and options of the sonar
After selecting the type of sonar, you must select the appropriate model, based on:
- range of surveyed (working) depths
- type of vessel (carrier)
All produced models operate in the ultrasonic frequency range and use the following medium operating frequencies:
- 100 kHz (for SSS, SSSE, ISSS)
- 150/15 kHz (for PPF)
- 300 kHz (SSS, SSSE, ISSS)
- 500 kHz (PFES as part of SSS at 100 kHz)
- 700 kHz (SSS, PFES as part of SSSE and ISSS at 100 kHz)
The choice of the medium operating frequency determines the main technical characteristics of the sonar: range-resolution.
If necessary, you can order a sonar with a different operating frequency.
If the produced models do not fit Your requirements, you can order a modification of the existing model.
After selecting the sonar model, you must select the options (if available for this model) based on:
- placement (the length of the cables)
- the type of interface (connection to computer)
- presence of navigation receiver, sensors
- type of planned power supply (type of power cable connector)
Options are specified when ordering.
The following sonar kits are available as standard:
- basic kit (minimal configuration and cost)
- mobile kit (more complete configuration, higher cost)
The composition of the kits is specified in the relevant specifications.
The initial configuration of the complex can be simple, in the future it is possible to upgrade the complex.
The basic set (BS) of the complex is used as the basis for obtaining the necessary configuration of the complex. Using the BS and equipment from the expansion kit, as well as your own equipment, you get the required solution. BS are designed to accommodate the complex on board of any ship in stationary or mobile versions.
The mobile kit is designed for mobile (portable) use and contains the most complete set of equipment that allows you to work autonomously for several hours. The mobile kit is placed in one case, has small dimensions and weight. As additional equipment, only a computer and a sonar attachment to the vessel are required.
If necessary, it is possible to supply fully ready-to-use kits, including all the necessary equipment for work (system "turn on and work"). Such kits are configured for specific requirements (tasks) of the User.
The initial configuration of the complex can be simple, in the future it is possible to upgrade the complex.
Selecting a set of optional equipment
Depending on the selected set and the tasks to be solved, it is necessary to use additional equipment, including:
- Power supply system ( for sonar, computer, sensors)
- rechargeable batteries
- power adapters
- auto adapters
- chargers
- power generators
- Navigation and orientation system
- navigation receiver
- angle sensors (course-roll-trim)
- sensors of sound velocity in water, sound velocity profile
- Computer
- Attachment to the vessel
- Accessories
You can use standard (purchased) equipment, or purchase equipment from the expansion kit.
Selection of additional SW set
The standard package includes software - HyScan Program.
Depending on the selected set and the tasks to be solved, you may need to use additional software:
- Navigation programs (ship navigation)
- secondary data processing programs, etc.
Additional SW is purchased separately or can be included in the package.
Configuration of the complex according to Your requirements
Depending on the tasks and requirements, we can choose the necessary configuration of the complex. The initial configuration of the complex can be simple,but in the future it is possible to upgrade the complex.
To configure the complex to your requirements, fill out the form below and send it to us.
Request complex configuration